1.More stable:
Through gravity adjustment, widened front wheel, the Marking Machine is more stable than traditional ones when marking 450mm zebra crossing.
2.Lighter:
Through repeatedly gravity test, rechoose new shaft, the marking machine is much lighter, reduced operator's working intensity. So the marking works become easier and more effectively.
3.Easy to operate:
Marking hopper's operating range minimized from 300mm to 200mm, more accurately , easier to control, therefore such problems as slow hopper withdrawal and uneven finishing mark edge are solved. A multi-point sliding block pressing structure is used to avoid material leakage witch often occurs to similar products due to the two tightly pressed sides and large deformation in the middle of product alike.
Hand Push Marking Machine (Screed type) | |
Model | TW-H |
Cover | Thermoplastic |
Engine | Manual one, no engine |
Dimensions | 1200 mm *900 mm*900mm |
Output capacity | About 1500m/h for standard single continuous line |
Paints thickness | 1.2-4mm |
Application Width | 100mm,150mm,200mm |
Temperature maintenance of paints | 170-220℃ |
LPG cylinder norm | 15kg,10kg |
Marking width | 50,80,100,120,150,200,230,250,300mm, etc. The machine is more suitable for marking 450mm zebra stripes. |
Tank capacity for thermoplastic | 105kg |
Function | Keep melted paint warm and mark line. |
Total weight of machine | 125kg |
Capacity of glass beads box | 25kg |
Bead dispensing method | Gear Driven, Automatically Clutch |
Work with a preheater | Yes |
Daily work efficiency | 1000 m2 |
Could equip with boosting driver, boosting plate, boosting chair? | Boosting Drive (with Engine ) |
Contact Us
Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.
Get In Touch With US
If you have more questionswrite to us, tell us your requirements, we can do more than you can imagine
Recommended