- ACE ASOK's Top Pick: The Best Portable High-Frequency Concrete Vibrator for Any Construction Project
|Rated input power||2300W|
|No-load speed||18000 r/min|
High-frequency vibrator shaft
Diameter of head
Length of head
Diameter of flexiable hose
Diameter of flexiable shaft
Price for 4mtr
Price for 5mtr
Price for 6mtr
1. Do not leave the vibrating poker operating in the air as it will be overheated. The poker is only effectively cooled when it is immersed into the concrete.
2. Do not stop the vibrator motor whilst the poker is immersed as withdrawing will be difficult.
3. Do not lubricate the internal poker.
4. Clean the poker at 50-hour use interval.
5. Hit the poker head against the ground to start vibrating motion.
6. Hold the poker by the rubber sleeve that is wrapped around it in case excessive bending of the flexible tube occurs. Excess bend causes friction and makes the flexible tube more likely to overheat. Therefore, always keep the flexible tube as straight as possible when operating.
7. To stop the engine, turn off the ignition and cut off the petrol supply.
8. Be sure that the poker is fully immersed into the concrete.
9. The poker and flexible tube of the concrete vibrator should be maintained and cleaned with petrol every 100 hours of use.
Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.
Get In Touch With US
If you have more questionswrite to us, tell us your requirements, we can do more than you can imagine