A construction equipment supplier of construction machinery solutions for 25 years.
Language
A construction equipment supplier of construction machinery solutions for 25 years.
Usually buyers have many questions after purchasing steel bar bending machine from abroad. Today I will answer common questions for you, as well as some key questions that buyers often ask. I hope you can ask more questions or contact us.
Rebar bending machines bend different types of rebars in the project into the shapes required by the project, so they are widely used in bridges, tunnels and other large infrastructure projects. Rebar bending machines are simple to operate, reliable in quality and excellent in performance. They are mainly composed of a box, power, frame, wire rod, electrical appliances, etc.
Rebar bending machines are divided into five types: manual bending machines, fully automatic bending machines, CNC bending machines, diesel bending machines and portable bending machines.
Portable bending machines are easy to carry; diesel bending machines are suitable for projects with insufficient electricity; CNC bending machines are suitable for Chinese construction groups in foreign aid construction because they are more skilled in operation. Fully automatic bending machines can accurately locate the bending angle through pin holes and are most widely used; manual bending machines are suitable for construction with small rebars and small engineering quantities.
Different types of rebar bending machines bend rebars into the required shape through the attachment of different sizes of shafts when bending rebars. Sometimes, according to multiple construction sites of customers, different types of bending machines will be constructed at the same construction site. They process rebars at the same time, so that equipment will not be wasted. Manual bending machines and diesel bending machines control the bending angle through the workers' operating habits, fully automatic bending machines control the bending angle through the disc hole, CNC bending machines control the bending angle through the panel, and portable bending machines control the bending angle by replacing the mold.
The fully automatic steel bar bending machine has a precise bending angle. The manual steel bar bending machine relies on people's habit of bending. Therefore, the fully automatic steel bar bending machine is more efficient than the manual steel bar bending machine, with a faster bending speed and no waste.
The weight of the fully automatic steel bar bending machine is heavier than the manual bending machine, and it is not easy to deform when bending, and has a long service life.
Although the manual bending machine is cheaper than the fully automatic bending machine, it is easy to be eliminated by the construction party because of its light weight, low efficiency, and easy deformation when bending, resulting in equipment waste.
1. Check the power supply, check the equipment, place the equipment in an open area, keep the equipment in a horizontal state and fix it. Prepare the steel bars and accessories.
2. According to the bending drawing, place the steel bars on the bending platform and insert them into the column.
3. Check the column and wire rod to ensure that the wire rod is not damaged or cracked. The protective cover should be tightened reliably. The machine can be operated only after it runs normally.
4. Feed the steel bars between the two cylinders of the disc, and the square baffle supports the steel bars. Support the steel bars, check the surroundings and equipment, and then start the machine for operation.
5. It is strictly forbidden to replace the mandrel, change the angle, adjust the speed, refuel or disassemble during work
6. When bending steel bars, it is strictly forbidden to process steel bars that exceed the diameter, number of steel bars, and mechanical speed specified by the machine
7. When bending high-hardness or low-alloy steel bars, the maximum limit diameter should be changed according to the machine nameplate and the corresponding mandrel should be replaced
8. It is strictly forbidden to stand within the working radius of the bent steel bars and on the side where the machine body is not fixed. The bent semi-finished products should be stacked neatly, and the accessory hooks should not face up after bending
9. After bending, you must wait until the turntable returns to the starting position and stops before the next operation.
10. After work, clean up the site, store the machine, and turn off the power lock box.
1. It is not allowed to bend steel bars at heights or on scaffoldings to avoid being broken and falling from heights during operation;
2. Before the machine is officially put into operation, all parts of the machine should be checked, and it can only be officially put into operation after the no-load test run is normal;
3. During operation, pay attention to being familiar with the direction of the working circle, and place the steel bars according to the rotation direction of the block and the working plate, and do not reverse;
4. During operation, the steel bars must be placed in the middle and lower part of the plug. It is strictly forbidden to bend the steel bars beyond the cross-sectional size. The rotation direction must be accurate, and the distance between the hand and the plug must not be less than 200mm;
5. During the operation of the machine, it is not allowed to refuel or clean, and it is strictly forbidden to replace the mandrel, pin shaft, or change the angle.
As a buyer, how should I choose the steel bar bending machine that suits me?
Capacity: Make sure the machine you choose can handle the thickness and type of rebar you need to bend. Check the machine's maximum bend angle and thickness before purchasing.
Production volume: If you're bending a lot of rebar, consider a machine with a high production rate and can be used continuously.
Automation: Choose a rebar bending machine with automation features, which can increase efficiency and reduce the need for labor. Consider whether automation is important to your operation.
Size and portability: Consider the size of the machine and whether it can be easily moved to different locations, if necessary.
Price: Determine your budget and look for a machine that fits your price range. Keep in mind that pricier machines may offer additional features and capabilities.
1. Check if the machine is clearly marked and numbered.
2. Check if the machine is standing on a solid base.
3. Check if the machine is grounded.
4. Check if the switchboard connected to the machine is equipped with a leakage short-circuit function.
5. Check if the cable is in good condition.
6. Check if the machine guards (belts and other internal moving parts are covered/protected) are required.
7. Check if the emergency switch is in working condition.
8. Check if the power switch has an indicator light and is in working condition.
9. Check if the hand guards on both sides are available.
10. Check if the limit switches (on both sides of the disc) are working properly.
11. Check if the machine is leaking oil.
We are a Chinese manufacturer specializing in the production of concrete pokers. We have 29 years of business experience, 7 professional engineers and 3 local factories. Years of experience have led to us having more than 1,000 customers in 128 different countries around the world.
If you have any questions about concrete pokers and need our help, you can contact us at any time, we look forward to hearing from you and establishing a good business partnership with you.
