Product knowledge popularization
A construction equipment supplier of construction machinery solutions for 30 years. WhatsApp:+86-18968212829
Language
A construction equipment supplier of construction machinery solutions for 30 years. WhatsApp:+86-18968212829
Usually buyers have many doubts about compactors after buying them from abroad. Today I will answer your common questions and hope that you can ask more questions or contact us.
The user is holding the machine, and the machine moves forward on its own. If the humidity is high, the machine cannot move, just like a person stepping on cotton. There must be someone or a machine in front to pull the compactor. The soil moisture is related to the weight of the compactor itself. , light weight will have certain effects. For example, it will not be pressed tightly. Soil thickness does not affect the compaction effect.
First, the oil circuit is blocked. Second, is the spark plug good? Third, is there something wrong with the high-voltage line generator board? If there is still a problem with the machine after the above three exclusions, it means that the carburetor is clogged or the atomization ability is not strong. Check which of the four accessories is faulty, and replace whichever one is found to be faulty.
For asphalt, soil, sand, gravel and mixed soil, small stones, small bricks, cobblestones, etc. in the field of gardening, a water tank must be added to the asphalt pavement (without water in the water tank, the machine on the asphalt pavement will not be able to run, the machine is very sticky and the road surface will be damaged if water is not added) If the road surface is uneven or hard, you can also add some water, so the dust will become much smaller.) A rubber pad should be placed under the machine, which is suitable for small machines such as C60. If the concrete needs to be compacted, the concrete must be relatively dry，moist Concrete cannot be compacted
The C120 flat plate rammer is 70 cm long and 52 cm wide, and the C60 flat plate rammer is 50 cm long and 30 cm wide. The frequency of large machines is not high and the impact is strong. For example, for an area of 100 square meters, 3-4 hours is enough. If the compaction is deeper than -3 cm, it will take a long time. Depending on the extent and goals of your construction, The small machine is suitable for compacting ordinary roads. If it is an asphalt road, it is recommended to use a c120 or larger plate compactor.
Before the machine is started, it will disturb the residents and make a lot of noise. Please prepare gloves, helmets, rubber shoes, earplugs, and other protective measures. Try to do it when the residents are not resting.
The screws of the machine are loose. Check the screws in each part to prevent loosening. Tighten them. Check the screws after use. Check the screws and tighten them before use. Screws are relatively expensive. One anti-loose screw costs about 100 yuan. We have a unique factory. The included screws are also anti-loosening. If you need to replace them, you can purchase them additionally.
The air filter of the compactor needs to be replaced. If the working place is very dusty, it should be replaced every 2-3 months. If the dust is small, it does not need to be replaced. If the spark plug is broken, it needs to be replaced, but it basically does not need to be replaced.
The heavy-duty shock absorber of the compactor basically does not require maintenance. If the maintenance is performed once every 1-2 years, remove the belt and take out the screws. The heavy-duty shock absorber is a very important component of the plate compactor. Reduce larger vibration amplitude.
We are a professional supplier of Plate compactor. If you have more questions about Plate compactor, you can discuss them with us at any time.
