
Exclusive factory production

Direct supply from overseas suppliers

Commodity door to door/port of destination

customer order

provide identity information
It is ideal equipment for steel bar bending working. This model has reasonable design, simply structure.It enables to bend bars of diameters 6~50mm to various shapes, which is applicable in many kinds of construction projects such as bridge, tunnel etc.
Worry-saving: The main components can last for 10 years, and main wear parts can last for 3 years, which almost cost you nothing for maintenance.
Time-Saving: The international advanced design ensures the fastest bending speed.
Products Advantages
1.Adopt the totally enclosed type case so that distortion which happened under the condition of heavy load can be avoided.
2.Gear and gear shaft was made by high quality of structural steel, and the important parts under gone hardness treatment.
3.Working disk, stop gauge, pile head, and pile head casing were made by high quality of alloy steel which under gone hardness and treatment, together ensure a long working life.
GW50E steel bar bending machine adopts the fully enclosed GEAR BOX separated from the working disk for no distortions even under the condition of heavy loads and no oil leaking while lifting the machine.
1. Adopts the 10mm thicken top plate and high rigidity disk of iron, more durable.
2. Equipped with international standard copper motor.
3. Equipped with ultra-high hardness accessory and adjustable fender.
4. Equipped with stop switch, the machine can stop immediately,ensure the safety of the workers.
5. Adopt 16mm thick top plate,high rigidity disk,adjustable stylobate,the bending angle of more efficient.
6. Equiped with international standard copper wire brake motor,narrowing inertance when the machine stops and bending angle is more accurate.
7. Pin-type positioning disk,it can adjust angle from 0-360 degree,more easily and convinient.
This series of steel bar bender is manually operated. With simplified structure, the machine causes bars with diameters varying from 3mm to 30mm to be bent into various shapes. It is a useful tool on construction sites, such as bridge and tunnel building.
Feature:
1.Max. Bending Diameter:¢30mm(plain carbon steel)/ ¢22mm (II-grade deformed steel bar)
2.Dust proof brake motor and two limit switch to ensure the accuracy of the bending angle also after stopping and restarting.
3.The steel bar bender is a double driving wheel, equipped with pre bending device, which can work in a straight and reverse direction.
4.Safe, credibility and steady performance
It is ideal equipment for steel bar bending working. This model has reasonable design, simply structure.It enables to bend bars of diameters 6~50mm to various shapes, which is applicable in many kinds of construction projects such as bridge, tunnel etc.
Products Advantages:
1.The high setting model adopted braking motor, insert pin type location disc to ensure the accuracy of bending radian and the convenience of adjustment.
2.The stop gauge can be installed from four different corners to realize the requirement of putting steel bar from various directions.
3.The controlling table adopted rotary type which made the transportation and operation full of humanization.
Exclusive factory production
Direct supply from overseas suppliers
Commodity door to door/port of destination
customer order
provide identity information
''Gold Medal Seller'' is the highest evaluation of our customers, we will make customers more and more satisfied