A construction equipment supplier of construction machinery solutions for 30 years. WhatsApp:+86-18968212829
Language
A construction equipment supplier of construction machinery solutions for 30 years. WhatsApp:+86-18968212829
CD-600L remote control flail mower with 600 mm cutting width, tracked drive and electric power for tall grass, slopes, orchards and rough terrain.
The CD-600L remote control flail mower is a fully electric tracked mowing machine for tall grass, dense weeds, slopes, orchards, vineyards and other areas where conventional walk-behind mowing equipment can be difficult to operate. It combines a 600 mm working width with a single-shaft flail blade system, 36 manganese-steel cutting blades and eight fixed blades to process vegetation from approximately 100 to 2500 mm high. Two 800 W / 48 V brushless travel motors power the tracked undercarriage, while a 3.5 kW working motor drives the cutting system. With a climbing capacity of less than 40°, remote control range of less than 200 m and adjustable stubble height from 25 to 100 mm, the CD-600L gives operators greater flexibility when mowing steep, uneven or overgrown ground. Its compact 1580 × 720 × 480 mm dimensions, low-profile body and 285 kg machine weight make this 600mm tracked flail mower particularly relevant for professional vegetation management, agricultural land maintenance, roadside work and sites where operator access close to the cutting area is undesirable.
| Parameter | Specification |
|---|---|
| Product Type | Fully Electric Tracked Remote-Control Flail Mower |
| Model | CD-600L |
| Machine Dimensions | 1580 × 720 × 480 mm |
| Structure Type | Remote-Controlled Tracked Type |
| Working Lithium Battery | 48 V / 180 A |
| Working Motor Power | 3.5 kW |
| Working Motor Starting Mode | Manual |
| Travel Speed | 3.2 km/h |
| Transmission Mode | Belt Drive |
| Climbing Capacity | <40° |
| Remote Controller | C7 Remote Controller |
| Remote Control Range | <200 m |
| Travel Motor | 800 W / 48 V Brushless Motor × 2 |
| Track Size | 120 × 60 × 34 |
| Working Width | 600 mm |
| Blade Type | Serrated Blades: 2 Curved and 1 Straight |
| Blade Quantity | 36 Pieces |
| Blade Material | Manganese Steel |
| Blade Holder Structure | Single-Shaft Flail Blade System |
| Fixed Blade Quantity | 8 Pieces |
| Adjustable Stubble Height | 25–100 mm |
| Mowing Height | 100–2500 mm |
| Standard Functions | Front LED Headlight; Mechanically Adjustable Cutting Deck |
| Machine Weight | 285 kg |
The CD-600L can be used as a remote control slope mower for suitable hillsides and embankments. Remote operation allows the operator to control the machine from a separate position rather than following it directly across difficult ground.
The flail cutting system makes the machine suitable for tall grass, dense weeds and neglected vegetation. This gives buyers searching for a flail mower for tall grass a more specialised alternative to conventional lawn-mowing equipment.
The compact tracked chassis can be used for vegetation management between suitable orchard and vineyard rows. Buyers should compare the machine's 720 mm overall width with their actual row spacing and turning area before selecting the mower.
A compact remote control tracked mower can support grass and weed management around suitable solar installations where conventional tractors may have limited access. Site clearance and panel layout should be checked before operation.
The CD-600L can also support roadside, park, estate and municipal vegetation maintenance where tall grass, irregular terrain or restricted operator access make conventional mowing less convenient.
Farm tracks, field margins, orchards, drainage areas and other rural properties can require repeated control of tall vegetation. The tracked drive and remote-control system make the CD-600L relevant to these demanding maintenance jobs.
A conventional rotary lawn mower works well on regularly maintained grass, but it is not always suitable for dense weeds or vegetation that has grown to substantial height. A flail mower uses multiple moving blades across a rotating shaft, allowing repeated contact with vegetation as the machine travels forward.
The CD-600L combines this cutting principle with 36 manganese-steel blades and eight fixed blades. For contractors and landowners, this means the machine is intended for vegetation clearance and height reduction rather than producing the fine finish expected from a residential lawn mower.
| Selection Factor | CD-600L Remote Flail Mower | Conventional Lawn Mower |
|---|---|---|
| Typical Vegetation | Tall grass, weeds and overgrown vegetation | Regularly maintained grass |
| Cutting System | Single-shaft flail blade system | Usually rotary blade deck |
| Travel System | Tracked | Usually wheeled |
| Operation | Remote controlled | Walk-behind, ride-on or autonomous |
| Terrain | Suitable rough ground and slopes | Mostly level or moderately uneven lawns |
| Main Objective | Vegetation management and rough cutting | Fine grass maintenance |
Working width is one of the first specifications to compare. A wider mower can cover more ground in each pass, while a compact machine may have better access between trees, vineyard rows or infrastructure. The CD-600L uses a 600 mm working width while keeping its overall machine width to 720 mm.
Slope capability should also be evaluated against the actual site rather than treated as a single marketing number. Surface condition, vegetation, soil moisture, direction of travel and obstacles can all affect traction. The CD-600L has a specified climbing capacity below 40°, but operators should still follow safe operating procedures and assess each site before mowing.
Cutting-system construction is equally relevant for professional buyers. Blade material, blade quantity, replacement cost and access for routine inspection all affect maintenance over the machine's working life. The CD-600L uses 36 manganese-steel cutting blades and eight fixed blades in its single-shaft flail system.
The CD-600L combines a 600 mm flail cutting system, electric power, tracked travel and remote operation in a compact machine for professional vegetation management. Rather than relying on engine size alone, its specification focuses on the factors that matter in actual mowing work: traction, cutting width, blade arrangement, adjustable stubble height and operator control.
For European machinery dealers, landscaping contractors and agricultural buyers, the fully electric configuration also offers a different product position from conventional petrol-powered remote mowers. Its 48 V drive system, brushless travel motors and compact dimensions can suit buyers looking for an electric tracked solution for specialised mowing work.
ACE Machinery can discuss order requirements, replacement blades, wear parts, battery and charger configuration, packaging and dealer procurement needs before purchase. For distributors, spare-parts availability and service planning should be evaluated alongside purchase price when introducing a remote mower into a local market.
Tags: remote control flail mower, 600mm flail mower, tracked flail mower, crawler flail mower, remote control tracked mower, electric flail mower, remote control slope mower, remote mower for steep slopes, flail mower for tall grass, remote mower for orchard, vineyard mower, remote mower for solar farms, tracked mower for rough terrain, commercial remote mower, remote control flail mower manufacturer, CD-600L
The CD-600L is intended for cutting tall grass, weeds and overgrown vegetation on suitable slopes, agricultural land, orchards, vineyards, roadside areas and other rough-ground maintenance sites.
The CD-600L has a 600 mm working width. Its overall machine width is 720 mm, which should also be considered when planning operation between orchard or vineyard rows.
The supplied specification gives a mowing-height range of 100–2500 mm. Actual cutting performance depends on vegetation density, moisture, terrain, blade condition and operating speed.
The mechanically adjustable cutting deck provides a stubble-height range from 25 to 100 mm.
The machine uses 36 manganese-steel cutting blades and eight fixed blades within a single-shaft flail blade system.
The supplied specification lists a climbing capacity of less than 40°. Actual safe operation depends on ground condition, slope direction, traction, vegetation and other site factors, so the manufacturer's operating limits should always be followed.
The C7 remote controller has a stated operating range of less than 200 m. Effective range can vary with terrain, obstacles and local operating conditions.
No. The CD-600L is a fully electric tracked flail mower. It uses a 48 V electrical system, two 800 W brushless travel motors and a 3.5 kW working motor.
Yes, where row width, terrain and working conditions are suitable. Its compact 720 mm overall width and tracked chassis make it relevant for vegetation management between suitable orchard and vineyard rows.
It can be considered for suitable solar-farm vegetation maintenance because of its compact tracked layout and remote operation. Clearance around panels, structures and cables should be checked before use.
Dealers should confirm battery and charger configuration, cutting blades, wear parts, remote-control system, transport dimensions, local compliance requirements and spare-parts support. These factors influence total ownership cost as much as the initial machine price.
Contact ACE Machinery for CD-600L specifications, configuration details, dealer and wholesale enquiries, replacement parts, packaging and international shipping information.
Contact Us
Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.
Get In Touch With US
If you have more questionswrite to us, tell us your requirements, we can do more than you can imagine
Recommended
+86-18968212829
