Umhlinzeki wemishini yokwakha wezixazululo zemishini yokwakha iminyaka engama-30.
Idatha ye-CX12-6 i-excavator encane igqama njengomshini womgwaqo oguquguqukayo futhi ohlangene, olungele amaphrojekthi wokwakha ahlukahlukene. Yakho usayizi ohlangene isici esiyinhloko, esivumela ukusebenza kahle ezindaweni zokufinyelela ezincane noma ezilinganiselwe lapho okokusebenza okukhulu kungase kubhekane nezinselele.
Idizayinelwe ngokusebenza kahle kokulungisa engqondweni, i-CX12-6 ihlose ukunciphisa isikhathi sokuphumula nokunciphisa izindleko ezihlobene nokugcinwa nokulungiswa. Lokhu kugxila ekunakekeleni kalula kuqinisekisa ukuthi umshini uhlala usebenza futhi ukhiqiza isikhathi eside. Ukwengeza, iuhlelo oluphambili lokulwa nobugebengu yengeza isendlalelo esengeziwe sokuvikeleka, sinciphise ubungozi bokweba futhi sinikeze abanikazi balo ukuthula kwengqondo.
Ukuvumelana nezimo kwe-CX12-6 kuthuthukiswa nakakhulu ukuhambisana kwayo nezinto ezihlukahlukene, okuyenza ibe yimpahla eguquguqukayo nebalulekile ezindaweni zokwakha. Ukufakwa kwenamandla futhi okuthembekile Kubota injini yengeza ukuqina kwayo sekukonke kanye nokusebenza okuphezulu, iqinisekisa ukuthi ingakwazi ukubhekana nenqwaba yemisebenzi ngempumelelo nangempumelelo.
I-CX12-6 i-excavator encane
I-excavator encane ye-CX12-6 igqama ngokuklama nokusebenza kwayo okuphezulu. Usayizi wayo ohlangene kanye nokusebenza okunamandla kuyenza ilungele zonke izinhlobo zemisebenzi yokwakha nokumba. Idizayini enobude obuphelele obungu-2980 mm kanye nobude obuphelele obungu-2260 mm buvumela ukukhombisa ukuhleleka okuhle kakhulu ezindaweni ezilinganiselwe.
Izinzuzo zale excavator azibonakali nje ngobukhulu bayo, kodwa futhi ohlelweni lwayo oluthuthukisiwe lwe-hydraulic kanye ne-motor yokuhamba ephumelelayo . Uhlelo lwe-hydraulic lusebenzisa i-P1, amaphampu wegiya we-P2 kanye namaphampu wegiya we-P3, ngokugeleza okuhle kakhulu kanye nomthamo we-hydraulic, ohlinzeka ngokusekelwa kwamandla okuthembekile kokusebenza okuhlukahlukene. Imoto ehambayo ithatha i-LKG plunger motor, futhi isivinini esiphezulu sokuhamba singafinyelela ku-2/4km/h , iqinisekise ukunyakaza okuguquguqukayo phakathi kwezindawo zokwakha.
I-boom swing angle ye-CX12-6 ifinyelela kumadigri angu-55, futhi izinga lokugeleza nokucindezela kwamanzi kokubili kungama -21 amalitha/umzuzu kanye no-17.2 (175) Mpa (kgf/cm2) , okwenza ukumba nokunyakaza kube lula. Ngaphezu kwalokho, i-excavator ine-ground clearance engu-140 mm, iqinisekisa ukuzinza endaweni engalingani.
Iphuma nenjini kadizili epholiswe ngamanzi engu- D722-EF11 enamandla angu -10.2/2200 kW/rpm futhi ikwazi ukuvutha futhi ikhipha amandla. Injini isebenzisa ubuchwepheshe be-E-TVCS, okuyenza ihambisane nemvelo futhi iyonga.
Ngaphezu kwalokho, i-excavator encane ye-CX12-6 inesisindo sokusebenza esingu-1,200 kg, izinga lomthamo webhakede lika -SAE/CECE 0.024/0.020 cubic metres , kanye nobubanzi bebhakede 398/380 mm elinamazinyo asemaceleni nangenawo ngokulandelana.
Sekuhlanganiswe ndawonye, i-excavator encane ye-CX12-6 isibe yisinqumo esihamba phambili emikhakheni yesimanje yokwakha kanye nokumba ngomklamo wayo omuhle kakhulu, ubuchwepheshe obuthuthukisiwe nokusebenza okuhle kakhulu.
| Imodeli | CX12-6 |
| Ubukhulu | Ukucaciswa |
| Ubude bubonke | 2980 mm |
| Ukuphakama sekukonke | 2260 mm |
| Ijubane elinyakazayo | 8.3 rpm |
| Ububanzi bezicathulo zenjoloba | 180 mm |
| Ibanga le-tumbler | 1010 mm |
| Usayizi wedoza(ububanzi X ubude) | 750/990 X 200 mm |
| Amaphampu we-Hydraulic | Ukucaciswa |
| P1,P2 | Iphampu yegiya |
| Izinga lokugeleza | 10.5+10.5 I/min |
| Umfutho we-hydraulic | 17.2(175) Mpa(kgf/cm2) |
| P3 | Iphampu yegiya |
| Izinga lokugeleza | 3.1 I/imiz |
| Umfutho we-hydraulic | 3.9(40) Mpa(kgf/cm2) |
| I-Boom swing angle (kwesokunxele/ kwesokudla) | 55/55 deg |
| Izinga lokugeleza | 21 I/imiz |
| Umfutho we-hydraulic | 17.2(175) Mpa(kgf/cm2) |
| I-Hydraulic reservoir (I) | 12.6 |
| Umthamo wethangi likaphethiloli (I) | 12 |
| Indlela yokusebenza | Ukusebenza komshayeli |
| Travel Motor | I-LKG Plunger motor |
| Ubukhulu, ijubane lokuhamba (eliphansi / eliphezulu) | 2-isivinini, 2/4km/h |
| Ingcindezi yokuxhumana ephansi / i-Mpa(kgf/cm2) | 29.0(0.30) |
| Ukususwa komhlaba | 140 mm |
| Injini | Ukucaciswa |
| Imodeli | I-D722-EF11 |
| Uhlobo | Injini yedizili epholile ngamanzi i-E-TVCS |
| Amandla enjini | 10.2/2200 kW/rpm |
| Inombolo yesilinda | 3 |
| I-Bore X Stroke | 67 x 68 mm |
| Ukususwa (CC) | 719 |
| Intengo(FOB Ningbo,China) | $8,272.00 |
| Intengo yohlaka oluvikelayo | + $128,00 |
| Intengo Yophahla (canopy) | + $68,00 |
| Isisindo esisebenzayo | 1200 kg |
| Umthamo webhakede std. SAE/CECE | 0.024/0.020 m³ |
| Ububanzi bebhakede (namazinyo asemaceleni/ngaphandle kwamazinyo asemaceleni) | 398/380 |
I-CX12-6 i-excavator entsha encane
Ukuthengwa komthengi wamazwe ngamazwe
Ukunikezwa okuqondile okuvela kubahlinzeki baphesheya kwezilwandle
Izimpahla zithunyelwa endaweni eboshiwe
I-oda lezindawo zekhasimende
nikeza imininingwane kamazisi
Xhumana nathi
Thatha ithuba lolwazi lwethu nolwazi olungenakuqhathaniswa, sikunikeza isevisi engcono kakhulu yokwenza ngokwezifiso.
Xhumana Nathi
Uma unemibuzo eminingi sibhalele, sitshele izidingo zakho, singenza okungaphezu kwalokho ongakucabanga
Kunconyiwe
+86-18968212829
