Mini Excavator
Mai samar da kayan aikin gini na mafita na injunan gini na tsawon shekaru 30.
Harshe
Mai samar da kayan aikin gini na mafita na injunan gini na tsawon shekaru 30.
Akwai abubuwa da yawa da ake so game da sabbin ƙananan haƙa na Kubota. Suna da ƙarancin ƙarfi don haka zaka iya aiki cikin sauƙi a cikin tabo. Hakanan suna da ingantaccen tsarin sarrafawa, da haɓaka fasalulluka na ta'aziyya don kiyaye ku da kyau da kwanciyar hankali. Mafi kyawun duka, zaku iya dogara da waɗannan ƙananan na'urori na hydraulic don samun aikin da sauri da inganci.
| Samfura | CX12-5 |
| Injin / Fuel tsarin | |
| Kubota asali engine | √ |
| Mai tsabtace iska guda biyu | √ |
| Keɓewar baturi | √ |
| Ƙarƙashin hawan keke | |
| 180 mm roba hanya | √ |
| Waƙa mai canzawa | √ |
| Biyu flange waƙa rollers (lambar yanki akan kowace waƙa) | 3 guda |
| Tsarin ruwa | |
| Matsa lamba tara | √ |
| Tashar jiragen ruwa na duba matsa lamba na hydraulic | √ |
| Da'irar taimako ta 1st (AUX1) ta hanyar sarrafa ƙafar ƙafa | √ |
| Tsarin aminci | |
| Injin fara tsarin aminci | √ |
| Kubota asali tsarin hana sata | √ |
| Na'urar kulle tsarin | √ |
| Kulle lever mai aiki |
| Samfura | CX12-5 |
| Kayan aiki | |
| 1 LED haske aiki a kan albarku | √ |
| Alfarwa | |
| ROPS (Tsarin Kariya) | √ |
| bel ɗin kujera mai ja da baya tare da aikin faɗakarwa | √ |
| Na'ura mai sarrafa kayan aikin matukin jirgi tare da hutun wuyan hannu | √ |
| Dagawa Nuna Tsayi | Radius mai ɗagawa (m1.5) | Radius mai ɗagawa (m2) | Radius mai ɗagawa (max) | |||||||||
Gaba-gaba | Over-gefe | Gaba-gaba | Over-gefe | Gaba-gaba | Over-gefe | |||||||
| Blade Down | Blade Up | Blade Down | Blade Up | Blade Down | Blade Up | |||||||
| 2.0M | - | - | - | 1.8 (0.18) | 1.8 (0.18) | 1.6 (0.16) | - | - | - | |||
| 1.0M | 3.1 (0.31) | 2.8 (0.28) | 2.3 (0.24) | 2.3 (0.24) | 1.8 (0.18) | 1.5 (0.15) | - | - | - | |||
| 0.5M | 4.4 (0.45) | 2.5 (0.26) | 2.1 (0.21) | 2.7 (0.27) | 1.7 (0.17) | 1.4 (0.14) | 1.5 (0.15) | 0.9 (0.10) | 0.8 (0.08) | |||
| 0M | 4.1 (0.42) | 2.4 (0.24) | 2.0 (0.20) | 2.6 (0.27) | 1.6 (0.16) | 1.3 (0.14) | - | - | - | |||
| -1.0M | 2.6 (0.26) | 2.4 (0.24) | 2.0 (0.20) | 1.7 (0.18) | 1.6 (0.16) | 1.3 (0.13) | - | - | - | |||
Da fatan za a lura: * Ƙarfin ɗagawa yana dogara ne akan ISO 10567 kuma bai wuce 75% na matsakaicin nauyin injin ko 87% na ƙarfin ɗaga na'urar ba. * Ba a haɗa guga na tono, ƙugiya, majajjawa da sauran kayan aikin ɗagawa akan wannan tebur ɗin ba. 
Tuntube Mu
Yi amfani da iliminmu da ƙwarewar da ba mu da amfani, muna ba ku mafi kyawun sabis na keɓancewa.
Kasance tare da Amurka
Idan kuna da ƙarin tambayoyi ku rubuto mana, gaya mana buƙatunku, za mu iya yin fiye da yadda kuke tsammani
Nasiha
+86-18968212829
