Mechini ea Konkreite ea Screed
Mofani oa lisebelisoa tsa kaho oa litharollo tsa mechini ea kaho ka lilemo tse 30.
Puo
Mofani oa lisebelisoa tsa kaho oa litharollo tsa mechini ea kaho ka lilemo tse 30.
1. Aluminium alloy lbade e tšoarella haholoboima bo bobebe, bo tšoarella, foreimi e phahameng ea boemo bo holimo, ha e tsoe sebopeho habonolo
2.specially design, lehare le thata la aluminium le etsa hore ho be le qetello e boreleli ho feta li-screeds tse tloaelehileng.
3. li-rubber tse boima tsa rabara ho fokotsa boemo ba ho thothomela holim'a molamu.
4.mokhoa o fetolehang ka holimo, verticl le horiz ka alopsition9 kgetho
5.lipheletso tse chitja tsa lehare li etsa hore ho be bonolo ho potoloha litšitiso.
6.theho sekamela holimoe etsa hore enjene e se be konkreite kapa e dule fatshe ha e sa sebelisoe.
7. 'mele o le mong oa ho lahla e hokela habonolo ho enjene.
8.Eergency stop awitch e tenge
9.lehare le bonolo.
10.bophara bo fapaneng ba ho sebetsa.
Joalo kae mong oa baetsi ba Mechini ea Concrete Screed ea profeshenale Chaena, ASOK esale e thabela botumo bo botle
Mona ke kakaretso ealintlha:
1.Lehare la aluminium alloy kee tšoarellang haholo ebile e bobebe, ho etsa bonnete ba ho tšoarella ha screed le ho boloka foreimi e phahameng e sa holofetseng habonolo.
2.Thealuminium e entsoeng ka mokhoa o khethehileng, e thata lehare le etsa bonnete ba hore qetello e boreleli ho feta li-screeds tse tloaelehileng.
3.Lithako tse boima tsa rabara fokotsa boemo ba ho thothomela ho sebetsana, ho ntlafatsa matšeliso a opereishene nakong ea ts'ebeliso.
4.Thehandle e fetolehang ka bolelele, tse otlolohileng, le tse tšekaletseng tse nang le likhetho tse robong tse fapaneng, tse lumellang ergonomics ea motho ka mong.
5. Lipheletso tse chitja tsa lehare li thusabonolo maneuverability ho pota-pota litšitiso.
6.Thetilt-up stand e boloka enjene e tsoa konkreitekapa e theohe fatše ha e sa sebelisoe, ho e sireletsa hore e se ke ea senyeha.
7.'Mele oa ho lahla o le monge hokela habonolo ho enjene, ho etsa bonnete ba hore ho na le kamano e matla le e sireletsehileng.
8.Setsi sa ho emisa ts'ohanyetso se teng, se eketsang karolo ea polokeho mochining.
9.The lehare le ka fetoha habonolo, ho lumella ho ikamahanya le maemo ka potlako ho litlhoko tse fapaneng tsa morero.
10. Themechine ea konkreite ea screed e tla ka bophara bo fapaneng ba ho sebetsa ho fana ka litlhoko tse fapaneng tsa projeke.
ASOK, ho bamoetsi oa Mechini ea Konkreite ea Screed ea profeshenale naheng ea China, o bolokile botumo bo botle indastering,mohlomong ka lebaka la boleng le ts'ebetso ea lihlahisoa tsa bona.
Haeba u na le lipotso tse ling kapa u hloka lintlha tse ling, ikutloe u lokolohile ho botsa.
| mohlala | KCD-2 | KCD-4 |
| Enjene | moea-colled,2-cycle | moea o pholileng, 4-cycle |
| mofuta oa enjene | enjene ea peterole | Honda GX35 |
| Matla kw(hp) | 1.4(1.9) | 1.1(1.5) |
| boima ba kg(lbs) | 20(44) | 20(44) |
| mohlala oa lehare | CB4 | CB6 | CB8 | CB10 | CB12 | CB14 | CB16 |
| boholo ba lehare m (ft) | 1.2(4) | 1.8(6) | 2.4(6) | 3.0(10) | 3.7(14) | 4.3(14) | 4.9(16) |
| boima ba kg(lbs) | 2.90(6.40) | 4.36(9.6) | 5.81(12.80) | 7.27(16.00) | 8.72(19.20) | 10.16(22.40) | 11.61(25.60) |
Lisebelisoa:
Vibratory Screed e sebelisoa ho feta borokho, tsela e phahameng, boema-fofane, mabala a maholo, mabenkele a mabenkele .... joalo-joalo, bolelele ba ho sebetsa bo lumella mochini hore o lumellane le morero o fapaneng. Lehlakore le le leng la taolo le ka thusa ho boloka mosebetsi; Enjene ea Honda e fana ka matla a tsitsitseng.
"Survive on Quality".Re lula re hokela bohlokoa bo boholo ho laola boleng ho tloha
qalong ho isa qetellong. Re boetse re fumana netefatso ea lefats'e ka bophara, joalo ka CE, GS le China Gold supplier joalo-joalo.
Iteanye le rona
Nka monyetla oa tsebo le boiphihlelo ba rona bo ke keng ba lekanngoa, re u fa litšebeletso tse ntle ka ho fetisisa tsa ho iketsetsa motho.
Ikopanye le US
Haeba u na le lipotso tse ngata, re ngolle, re bolelle litlhoko tsa hau, re ka etsa ho feta kamoo u ka nahanang
E khothalelitsoe
+86-18968212829
